 |
| Place of Origin: | Jiangsu, China |
| Brand Name: | DAPENG MACHINERY |
| Certification: | CE |
| Model Number: | DP-25T-c |
| Minimum Order Quantity: | 1 set |
|---|---|
| Price: | US $1,100 - 3,999 / Set |
| Packaging Details: | wooden case |
| Delivery Time: | Shipped in 7 days after payment |
| Payment Terms: | T/T |
| Supply Ability: | 150 Set/Sets per Month |
| Cutting Force: | 20 Ton/25Ton | Cutting Area: | 900*430 Mm |
|---|---|---|---|
| Motor Power: | 0.75 Kw | Stroke: | 90 Mm |
| Cutting Plate: | 370*450 Mm | Oil Cylinder: | Hydraulic |
Applicable Materials:
This swing arm cutting press machine is used for cutting nonmetal materials such as shoe upper, hand bags, leather, rubber, plastic, cotton, textile, paper, or other similar materials.
It is widely used in shoes making industry.
Feature:
1.Labor saving and simplicity of operation,lower failure rate,better efficiency and high speed of cutting force.
2.Stroke preselecting mechanism,simple,accurate and quick speed regulation for high and low cutting die.
3.Automatic oil pressure lubricating system,making all work pieces automatic lubricated,for the increase of service life.
4.Rocker cutting head rotates freely, the best sight in operation, convenience in choosing materials and high efficiency.
5.Special material cutting head has lubrication system and prolong life, and the best cutting results.
6.Can use doublesided sharp cutting knife, saving the cost of labor and die cutter and pad.
7.Taking advantage of hand wheel to adjust the swing arm subtalar cutting stroke, adjusting operation smoothly and easily.
8.The hands button before cutting, and avoid continuing abuse, high security.
Technicial parameter:
Swing arm clicker Press machine - available in 8T, 10T, 20T, 22T , 25T, 27T.
Full head clicker press- avalible in 25T, 30T, 40T, 50T,...200T, 300T.
| Model | DP-D20T | DP-D25T |
| Cutting area | 900*430 mm | 900*450 mm |
| Motor power | 0.75 kw | 0.75 kw |
| Cutting Force | 20 Tons | 25 Tons |
| Machine Dimension | 900*980*1410 mm | 1000*1020*1410 mm |
| Stroke | 90 mm | 90 mm |
| Cutting Plate | 370*450 mm | 500*450 mm |
| Net Weight | 865 kg | 1202 kg |
| Oil cylinder | Hydraulic | Hydraulic |
Remark: We can make the machine according to your specifically order, for example the color, the motor information ,the working table etc.
5, The whole machine users self-lubricating system to reduce wear and extend the service life of the machine.
Hydraulic principle
When the motor starts, the pump produces oil from the A, B port back to the oil pool and a part of the oil into the body, the column sliding bearing surface, to maintain good lubrication when running. When the suction of the solenoid valve was forced to pull, the spool movement, the left working oil into the cylinder through the pipeline. So that the cylinder down, swing arm with cutter die material, when the control mechanism to make the iron off power loss, the spool reset, the column under the action of the spring reset.
